Resort and hotel spa builders for the Red Sea and Cairo

Egypt is a resort market. Roughly 235,000 hotel rooms with a record 46,000 in the pipeline, national occupancy above 80 per cent and Red Sea occupancy above 90 in summer (Travel And Tour World). A spa here is built for volume, not for a family.

Typical project in Egypt: EGP 1,250k – 6,000k, supplied and installed · six to ten weeks per room after the drawing is approved, plus shipping.

Across the continent: Hotel & resort spas in all eight countries →

Ask about this Build a quote

Resort and hotel spa builders for the Red Sea and Cairo

Volume changes everything

A resort thermal suite serves hundreds of guests a week, and every part of the specification follows from that: commercial-grade generators, duplicated plant where the suite cannot be allowed to close, finishes chosen for daily deep cleaning, drains that lift and rod, and a water regime somebody signs off on.

It also needs isolation on each room. A single failure that closes an entire listed amenity during peak season is expensive in a way that a domestic failure never is.

The Red Sea is not the Mediterranean

Red Sea water runs around 40 parts per thousand salinity, above the Mediterranean and well above the world ocean average. Equipment that lasts in Alexandria corrodes faster in Hurghada, and the specification has to change: A4 stainless throughout, sealed plant enclosures, deeper ventilated cavities and a corrosion inspection built into the service visit.

Building around occupancy

There is no closed season worth the name. We phase work, agree noisy windows, seal the site behind dust screens and keep circulation routes presentable, because paying guests walk past them every day.

And we train your team properly: two days at handover on operation, cleaning chemistry, water testing and the log, then a return visit at six months to check the log is being kept.

Who builds it and how it arrives

Hotel spas are the core of our factory's work: 220 hotel spa projects since 1987, for brands including Hilton, Hyatt, Sofitel, Rixos and Kempinski. Cabins, steam plant, benches and marble are made and dry-assembled in Istanbul, shipped to Sokhna for the Red Sea or to Alexandria and Port Said for Cairo and the north coast, and installed by our own crew while your contractor finishes the building.

A small hotel thermal suite sits at 1.25 to 2.7 million EGP indicative and a full resort spa at 2.8 to 6 million, supplied and installed. Send us the floor plan and the guest numbers the suite has to serve; we return an itemised, position-by-position proposal. Our analysis of whether a thermal suite pays back for an Egyptian resort sets out the arithmetic.

In short

Duplicated plant and isolation on each room so one failure never closes the suite
A4 stainless and sealed enclosures on the Red Sea — it is saltier than the Mediterranean
Phased construction behind dust screens, because there is no closed season
Two days of staff training at handover and a six-month log check

Questions

Hotel & resort spas in Egypt

How much space does a resort suite need?

From about 40–60 m² for a sauna, steam room, bathhouse, plunge positions and rest, plus 10–14 m² of plant for a duplicated installation.

Can you work during high season?

Yes, phased and screened. We would still rather do the heavy work in a quieter month if your calendar allows one.

Do you supply operating documentation?

Yes: manual, cleaning chemistry, water test schedule, log book, and training for the team that will run it.

Your project

Want it priced for your site?

Send us a photo of the spot and the rough size. Within one business day you get photos of comparable rooms we have finished and an itemised, position-by-position quote.

Get photos and an itemised quote

Egypt

Everything we build in Egypt

All rooms in Egypt

Where in Egypt

Read before you decide

Also in Egypt

Other rooms we build here